Services
Everything here starts the same way: we come out, look at the roof, and give you a written estimate before any work is done.
Leaks and repairs
A lot of roofs that leak don't need replacing. The water usually gets in at a seam or a penetration: around a chimney, a vent pipe, a skylight, or where two slopes meet in a valley. We find where it's actually coming in, which is often a few feet uphill from the stain on your ceiling, and fix that spot.
What's usually involved
- Replacing missing or creased shingles after wind
- New rubber boots on plumbing vents (they crack in the sun after ten years or so)
- Resetting or replacing step flashing and counter flashing at walls and chimneys
- Cutting out and replacing soft decking
- Matching shingles as close as we can get. On an older roof the color won't be perfect, and we'll show you a sample first.
If we think a repair is just buying a year or two on a roof that's worn out, we'll say so and price both options.
Roof replacement
When the shingles are curling, the granules are washing into the gutters, and you're patching something every spring, it's time. We tear the old roof off down to the deck so we can see what's under it. Bad decking gets replaced, and the estimate lists a price per sheet so you know what that costs before we start.
What's usually involved
- Tear-off of all existing layers
- Deck repair where needed
- Synthetic underlayment, with ice and water shield in the valleys and at the eaves
- New drip edge, pipe boots, flashing and attic vents
- Architectural asphalt shingles in the color you pick from the samples
- Haul-off of the old roof and a magnet sweep of the yard and driveway
Most houses take one or two days. Plan on some noise, and park your car out of the driveway the morning we start.
Metal roofing
Metal costs more up front than shingles and lasts a good deal longer. We install two kinds. Standing seam has hidden fasteners and is what we'd recommend on a house. Screw-down panels (exposed fastener) cost less and are fine on a barn, a shop or a carport, but the screws need checking every few years as the washers age.
What's usually involved
- Tear-off, or in some cases installing over furring strips on top of one layer of shingles
- High-temperature underlayment
- Panels cut to length for your roof
- Trim at the ridge, eaves, rakes and walls, with closures to keep wasps and birds out
Metal is loud in a hard rain in a building without an attic. On a house with insulation above the ceiling you mostly won't notice.
Storm and hail damage
Hail damage on shingles is hard to see from the ground. If your gutters, car or mailbox got dented, the roof probably took hits too. We'll go up, mark the hits with chalk, count them in a test square on each slope, and photograph everything. You get a written report you can send to your insurance company.
If you file a claim, the insurance company sends an adjuster. We can be there to go over the roof with them. If the adjuster misses something, we put it in writing and you can send it in with your claim. The claim stays between you and your insurance company. We don't ask you to sign it over to us.
What's usually involved
- Inspection and photo report, free for homeowners
- A tarp on any open spots while the claim is in process
- Meeting the adjuster, if you want us there
- Repair or replacement once you decide to go ahead
Insurance policies have deadlines for reporting storm damage. Check yours. Waiting until the next leak can make a claim harder.
Inspections
Buying a house, selling one, or just wondering how much life the roof has left. We go over every slope, check the flashing and vents, look in the attic for daylight and old water stains, and write it up with photos. The report says what condition the roof is in and roughly how many years we think it has.
What's usually involved
- Roof and attic inspection, about an hour on most houses
- A written report with photos, usually by email the next day
- A repair price for anything we'd fix now
Gutters
Gutters that overflow or pull loose send water down the siding and into the foundation. We hang seamless aluminum gutters made on site to the length of each run, so there are no joints along the eaves to leak.
What's usually involved
- 5 or 6 inch seamless gutters, 6 inch for long runs and steep roofs
- Hidden hangers screwed into the rafter tails
- Downspouts placed so water ends up away from the house
- Replacing rotten fascia board behind the gutter before it goes back up
- Gutter guards, if you have a lot of trees overhead
Want a price on any of this? Ask for an estimate or call (555) 010-0142.